Shoebox Time Machine backup server with Raspberry Pi ("poor man's Time Capsule")01 Aug 2016
It is possible and fairly easy to build an acceptable Time Machine backup server using a Raspberry Pi and a spare USB drive. Basically, the process is as follows:
- Install dependencies
- Format and set up the drive
- Download and compile netatalk
- Configure netatalk
1. Install dependencies
sudo apt-get install build-essential libevent-dev libssl-dev libgcrypt-dev libkrb5-dev libpam0g-dev libwrap0-dev libdb-dev libtdb-dev libmysqlclient-dev avahi-daemon libavahi-client-dev libacl1-dev libldap2-dev libcrack2-dev systemtap-sdt-dev libdbus-1-dev libdbus-glib-1-dev libglib2.0-dev libio-socket-inet6-perl tracker libtracker-sparql-0.16-dev libtracker-miner-0.16-dev libgcrypt20-dev
2. Format and set up the drive
Some guides call for using a hfsplus-formatted drive. If you have one that you previously used with macOS, by any means – use it. If not, I would prefer a more well-adapted GNU/Linux file system. I would recommend ext4, which is what most distros use, unless you have any particular reason to use something else.
sudo fdisk /dev/sda to partition your hard drive (this is assuming that the hard drive is the only USB harddisk or pendrive attached to your Raspberry Pi – if it is not, make sure you pick the right one!).
oto create a new partition table.
- Create a new partition using the
ncommand. Choose primary (
p) and use the suggested sizes (unless you have reason to change them). Choose the
Linux filesystem, which should be the default.
- When you are back at the main menu, press
wto write everything to disk and quit.
Now, format the drive as ext4:
sudo mkfs.ext4 -L "Time Machine" /dev/sda1. When you are done, determine the unique identifier (UUID) of the new partition with
blkid /dev/sda1 and copy the entire
UUID="LOTS OF TEXT" part.
Create a mount point at
sudo mkdir /media/time_machine.
/etc/fstab and add a line like this:
UUID="ca92ada0-e97a-44fc-badb-f0e934d775c9" /media/time_machine ext4 defaults,rw,user,auto 0 0
Mount it using
sudo mount -a and try writing anything to
touch /media/time_machine/test.file). If you get permissions errors, do
sudo chown -R user /media/time_machine, where
user is your user name (again, proably pi).
3. Download and compile netatalk
Netatalk is a free implementation of Apples network/file sharing protocols. It is available from the official repositories, but that version is ancient, so we need to compie it ourselves.
First, download it. You can either do it on your local machine and copy it to your raspberry pi using
scp, or you can find a link on the download page and use
wget <file link> to download it directly. After you have it, just extract it with the usual
tar xvf netatalk-3.1.9.tar.bz2 (assuming you have the same version).
You can follow the official guide, but basically it is a matter of running
configure with the right flags.
First, see which version of tracker you got from apt-get:
pkg-config --list-all | grep tracker and insert it after –with-tracker-pkgconfig-version in the proposed command. In my case, I got 1.0:
./configure --with-init-style=debian-systemd \ --without-libevent --without-tdb \ --with-cracklib --enable-krbV-uam \ --with-pam-confdir=/etc/pam.d \ --with-dbus-daemon=/usr/bin/dbus-daemon \ --with-dbus-sysconf-dir=/etc/dbus-1/system.d \ --with-tracker-pkgconfig-version=1.0
Verify that DHX2 is enabled (you need it for password authentication on recent versions of macOS, at least El Capitan):
UAMS: DHX (PAM SHADOW) DHX2 (PAM SHADOW)
make && sudo make install it!
4. Configure netatalk
After that, update your
[Global] ; Global server settings vol preset = default_for_all_vol log file = /var/log/netatalk.log uam list = uams_dhx.so,uams_dhx2.so mimic model = TimeCapsule6,106 [default_for_all_vol] file perm = 0664 directory perm = 0774 cnid scheme = dbd valid users = amanda [Time Machine] path = /media/time_machine time machine = yes
Substitute your own user name for
valid users, or omit the line entirely to allow all users. Remember, this is a user account on the server. If you are using a Raspberry Pi, this is probably the “pi” user and “raspberry” password (but you really should create a user of your own and change the password of the default account!).
mimic model doesn’t really do much, except giving your Raspberry Pi a nice Time Cube icon in Finder.
Start up netatalk:
sudo service netatalk start
Keep track of the logs using
sudo tail -f /var/log/netatalk.log, and try to browse and log in from your computer. The Raspberry Pi should appear in Finder, and you should be able to log in as your chosen user (e.g. pi).
When you are confident everything works, you can set up netatalk to start when the server does:
sudo systemctl enable netatalk
After this, you should be able to find and select your shoebox server as a target in Time Machine. Now, go and make a very big cup of tea as your computer runs its initial backup.
- http://www.techradar.com/how-to/computing/how-to-make-a-mac-time-capsule-with-the-raspberry-pi-1319989 (but this guide is obviously misinformed!)